青青青在线观看视频免费播放-青青青在线观看国产精品-青青青伊人-青青青亚洲精品国产-青青青网-青青青爽在线视频观看大全

洞察行業資訊 分享專業知識

洞察行業資訊 分享專業知識

洞察行業資訊 分享專業知識

洞察行業資訊 分享專業知識

聯系我們

  • 全國統一服務熱線：

    134 1039 1245
    400-996-0787
    0755-8399 9818

  • 聯系郵箱：

    sales@faxytech.com

  • 聯系地址：

    深圳市福田區華強北路華聯發大廈602室

10%長度原則：福祿克DTX-1800或者DTX-1500的10%長度原則

福祿克DTX-1800或者DTX-1500的10%長度原則（10% rule for length – DTX CableAnalyzer）

你是否在使用福祿克DTX-1800或者DTX-1500的時候長度會超出標準極限值？


Example1:

(The display here is from?DTX Version 2.74, have you updated your DTX CableAnalyzer?)


1.gif    


這個結果是對的嗎？這長度已經超出了90M。


從ANSI/TIA-1152工業標準，我們發現：


4.2.3.1無論速度和電磁速度。


4.2.3.1 Physical length vs.?electrical length

The pass or fail criteria is based on the maximum length allowed for the channel or permanent link as specified in ANSI/TIA-568-C.2 plus the nominal velocity of propagation (NVP) uncertainty of 10 %.


通過和失敗的判斷標準是依據ANSI/TIA-568-C.2 通道和永久的標準加上NVP速度的10%不確定性。

This means that although the limit is 90.0 m (295 ft), the tester will not fail the length parameter until the shortest pair of the four pairs has exceeded 90 m + 10 % (99 m) or 295 ft + 10% (325 ft). In the example above, the shortest pair was 92.5 meters, less than the 90 m + 10 % permitted by this standard.


這就意味著盡管極限標準是90M，但是DTX-1800或者DTX-1500顯示92.5M，小于90M+10%的允許量。


Many customers do not like/agree with this feature. However, your DTX-1800或者DTX-1500 CableAnalyzer is standards based. Whilst Fluke Networks may not necessarily agree with the 10 % fudge rule, the industry agreed to this. We implement the standard as is. THIS IS NOT AN EXCUSE TO GO BEYOND 90 m!!!!!!!!!!! If the cable is marginally compliant, insertion loss will fail before length fails.


許多客戶也許覺得不同意但是福祿克DTX-1800或者DTX-1500是根據標準來的。福祿克網絡的設備也許沒有必要咨詢10%長度原則，但是工業標準支持，所以，我們根據標準制定了。


This rule applies to channel limits as well where the length limit is 100 m (328 ft). However, because of clause?4.2.3.1 in the standard, the length test will not fail until the shortest pair of the four pairs measured exceeds 100 m + 10 % (110 m) or 328 ft + 10% (361 ft).


It is important to understand that we used the shortest pair to report the length of the link. Again, this is detailed in clause 4.2.3.1 of ANSI/TIA-1152.


When physical length is determined from electrical length, the physical length of the link calculated using the pair with the shortest electrical delay shall be reported and used for making the pass or fail decision.


Example 2: 

(The display here is from DTX Version 2.74, have you updated your DTX CableAnalyzer?)


    2.gif


Here we see that the shortest pair is 7,8 with a length of 97.9 m and hence a PASS since it does not exceed the 90 m limit by more than 10%. The other two pairs did exceed 90 m plus 10% and are marked I for Information Only but are not used for uating the link.


我們通過上圖可以看到DTX-1500顯示的7.8線對是97.9M，結果顯示是通道。因?yàn)樗鼪]有超過90M的百分百之十。其他兩對線路已經超過了10%并且標記了I對于參考，但是我們沒有評價沒有用作評價對這條鏈路。


Example 3:

 If the pair with the shortest length exceeds 90 m plus 10%, then length is reported as FAIL (shown below).


如果所有的都顯示超過90M+10%，那么它就會顯示失敗了。

3.gif

相關產品（1）
相關配件（）
主站蜘蛛池模板： 18韩国美女vip视频7| 欧美日韩精品免费一区二区三区| 视频免费视频观看网站| 8x8x拔插| 国产午夜免费| 天天澡夜夜澡狠狠澡| 久久九九精品国产自在现线拍| 免费高清特黄a 大片| 国产永久一区二区三区| 成人特级毛片69免费观看| 色色色色色色网| 69p69国产精品| 亚洲精品一区二区三区在线看| 欧美亚洲国产精品久久第一页| 我的绝色岳每雯雯| 国产一区私人高清影院| 久久久久久久伊人电影| 亚洲国产视频一区| 国产精品国产色综合色| 门卫老张和女警花小说| 美女露奶奶| 99av涩导航| 娇妻被老外疯狂调教| 日本中文字幕高清| 性欧洲女人18| 91精品国产在线| 国产精品视频2020| 性吟网| 欧美同性gayvidoes| 爱情岛论坛亚洲永久入口口| 亚洲3dxxxx动漫xxx| 日日爽| 视频一区二区 村上凉子| 国产欧美日韩精品一区二区三区| 黄色a视频| 成人黄色a级片| 日韩在线a视频免费播放| 亚洲欧洲淘宝天堂日本| 午夜视频网站| 色播影音先锋| 免费a漫 - 禁密天堂|